- Description
- Size Guide
Description
Fits Can-Am Defender HD10 6X6 Years 2020-Current
Strengthen Your Steering
Your Can-Am Defender is your most important tool throughout the workday. But the worn-out rack makes every job harder. You need something better: SuperATV’s Can-Am Defender HD10 RackBoss 2.0 Rack and Pinion. It uses our patented X24 Tech with bushings at both ends of the rack to reduce wear by over 50% compared to stock. With RackBoss 2.0 installed, you get long-lasting performance you can count on.Revolutionary X24 Tech and Dual Bushings
We use a dual PTFE bushing design to prevent the wear and tear you’re used to. Thanks to our X24 Tech, which uses tough bushings at both ends of the rack, RackBoss 2.0 can power through bigger hits with larger tires without wearing out fast. You get like-new operation that lasts longer than any other Defender steering rack. Plus, the built-in grease fittings allow you to push out all the crud that gets in when you go hard in mud or water. It’s only possible with RackBoss 2.0.Enhanced Swaged Tube Tie Rods
Our steel swaged tube tie rods are perfect for optimal strength without adding a ton of weight. The swaged design significantly enhances the durability of the 7/8” diameter tubing. These tie rods feature 16 mm inner ball and sockets and 14 mm outer tie rod ends, ensuring maximum strength in critical areas. If you’re a casual rider seeking improved performance over your stock setup, these are the tie rods you need.
Your Can-Am Defender is your most important tool throughout the workday. But the worn-out rack makes every job harder. You need something better: SuperATV’s Can-Am Defender HD10 RackBoss 2.0 Rack and Pinion. It uses our patented X24 Tech with bushings at both ends of the rack to reduce wear by over 50% compared to stock. With RackBoss 2.0 installed, you get long-lasting performance you can count on.Revolutionary X24 Tech and Dual Bushings
We use a dual PTFE bushing design to prevent the wear and tear you’re used to. Thanks to our X24 Tech, which uses tough bushings at both ends of the rack, RackBoss 2.0 can power through bigger hits with larger tires without wearing out fast. You get like-new operation that lasts longer than any other Defender steering rack. Plus, the built-in grease fittings allow you to push out all the crud that gets in when you go hard in mud or water. It’s only possible with RackBoss 2.0.Enhanced Swaged Tube Tie Rods
Our steel swaged tube tie rods are perfect for optimal strength without adding a ton of weight. The swaged design significantly enhances the durability of the 7/8” diameter tubing. These tie rods feature 16 mm inner ball and sockets and 14 mm outer tie rod ends, ensuring maximum strength in critical areas. If you’re a casual rider seeking improved performance over your stock setup, these are the tie rods you need.

size | chest(in.) | waist(in.) | hips(in.) |
---|---|---|---|
XS | 34-36 | 27-29 | 34.5-36.5 |
S | 36-38 | 29-31 | 36.5-38.5 |
M | 38-40 | 31-33 | 38.5-40.5 |
L | 40-42 | 33-36 | 40.5-43.5 |
XL | 42-45 | 36-40 | 43.5-47.5 |
XXL | 45-48 | 40-44 | 47.5-51.5 |
Related Products
By Parts Manufacturer, CanAm, KWT Particle Separator, Maverick X3, UTV
15'-21' CAN-AM MAVERICK X3 Turbo KWT Particle Separator
0 out of 5
$399.00 – $415.00
Fits Can-Am X3 Turbo 2015 to 2021
The KWT X2 Particle Separator has updated innovative cyclonic...
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
By Parts Manufacturer, KWT Particle Separator, POLARIS, UTV
15'-21' POLARIS RZR 900/S KWT Particle Separator
0 out of 5
$399.00 – $415.00
Fits RZR 2015 to 2021 900
The KWT X2 Particle Separator has updated innovative cyclonic technology,...
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
By Parts Manufacturer, KWT Particle Separator, POLARIS, Pro, UTV
20'-21' POLARIS RZR PRO XP KWT Particle Separator
0 out of 5
$499.00 – $515.00
Fits RZR Pro XP 2000 to 2021
The KWT X2 Particle Separator has updated innovative cyclonic...
Select optionsThis product has multiple variants. The options may be chosen on the product page
This product has multiple variants. The options may be chosen on the product page
By Model, By Parts Manufacturer, CanAm, Maverick X3, UTV, Zbroz Racig
CAN-AM X3/X3 MAX BULKHEAD REINFORCEMENT GUSSET KIT New !!
0 out of 5
$299.69
ZBroz Bulkhead Reinforcement Gusset Kit
Fits:
Can-Am Maverick X3 64" / Max 64" (2017 - Current)
Can-Am Maverick...
Artic Cat, CanAm, Kawasaki, Maverick X3, POLARIS, UTV, Yamaha
Joker Machine 6061 Billet Black Utv Fire Extinguisher Mount 1 3/4" Roll Cage & 2.5lb Extinguisher
0 out of 5
$235.00
Fire extinguisher holder is milled from a solid block aluminum. Once the pin is released...
CAN-AM DEFENDER HD10 2020-2024 RACKBOSS 2.0 RACK AND PINION NEW
0 out of 5
$399.95
SKU: RP-CA-DEF-001#AE
- Description
- Size Guide
Description
Fits Can-Am Defender HD10 6X6 Years 2020-Current
Strengthen Your Steering
Your Can-Am Defender is your most important tool throughout the workday. But the worn-out rack makes every job harder. You need something better: SuperATV’s Can-Am Defender HD10 RackBoss 2.0 Rack and Pinion. It uses our patented X24 Tech with bushings at both ends of the rack to reduce wear by over 50% compared to stock. With RackBoss 2.0 installed, you get long-lasting performance you can count on.Revolutionary X24 Tech and Dual Bushings
We use a dual PTFE bushing design to prevent the wear and tear you’re used to. Thanks to our X24 Tech, which uses tough bushings at both ends of the rack, RackBoss 2.0 can power through bigger hits with larger tires without wearing out fast. You get like-new operation that lasts longer than any other Defender steering rack. Plus, the built-in grease fittings allow you to push out all the crud that gets in when you go hard in mud or water. It’s only possible with RackBoss 2.0.Enhanced Swaged Tube Tie Rods
Our steel swaged tube tie rods are perfect for optimal strength without adding a ton of weight. The swaged design significantly enhances the durability of the 7/8” diameter tubing. These tie rods feature 16 mm inner ball and sockets and 14 mm outer tie rod ends, ensuring maximum strength in critical areas. If you’re a casual rider seeking improved performance over your stock setup, these are the tie rods you need.
Your Can-Am Defender is your most important tool throughout the workday. But the worn-out rack makes every job harder. You need something better: SuperATV’s Can-Am Defender HD10 RackBoss 2.0 Rack and Pinion. It uses our patented X24 Tech with bushings at both ends of the rack to reduce wear by over 50% compared to stock. With RackBoss 2.0 installed, you get long-lasting performance you can count on.Revolutionary X24 Tech and Dual Bushings
We use a dual PTFE bushing design to prevent the wear and tear you’re used to. Thanks to our X24 Tech, which uses tough bushings at both ends of the rack, RackBoss 2.0 can power through bigger hits with larger tires without wearing out fast. You get like-new operation that lasts longer than any other Defender steering rack. Plus, the built-in grease fittings allow you to push out all the crud that gets in when you go hard in mud or water. It’s only possible with RackBoss 2.0.Enhanced Swaged Tube Tie Rods
Our steel swaged tube tie rods are perfect for optimal strength without adding a ton of weight. The swaged design significantly enhances the durability of the 7/8” diameter tubing. These tie rods feature 16 mm inner ball and sockets and 14 mm outer tie rod ends, ensuring maximum strength in critical areas. If you’re a casual rider seeking improved performance over your stock setup, these are the tie rods you need.

size | chest(in.) | waist(in.) | hips(in.) |
---|---|---|---|
XS | 34-36 | 27-29 | 34.5-36.5 |
S | 36-38 | 29-31 | 36.5-38.5 |
M | 38-40 | 31-33 | 38.5-40.5 |
L | 40-42 | 33-36 | 40.5-43.5 |
XL | 42-45 | 36-40 | 43.5-47.5 |
XXL | 45-48 | 40-44 | 47.5-51.5 |
Related Products
-
Out of stockSelect options This product has multiple variants. The options may be chosen on the product pageQuick ViewBy Parts Manufacturer, KWT Particle Separator, UTV, Yamaha
19′-21′ Yamaha YXZ 1000R KWT Particle Separator
0 out of 5 -
Select options This product has multiple variants. The options may be chosen on the product pageQuick ViewBy Parts Manufacturer, KWT Particle Separator, POLARIS, Pro, UTV
20′-21′ POLARIS RZR PRO XP KWT Particle Separator
0 out of 5 -
Select options This product has multiple variants. The options may be chosen on the product pageQuick ViewBy Model, POLARIS, Turbo S, UTV, Zbroz Racig
POLARIS RZR TURBO S/TURBO S 4 HD PRO MAX LOWER RADIUS RODS
0 out of 5